|
AT JOHN DEERE, FEELING SECURE IS NOT AN
OPTION
Standard warranty promises that on
construction machines under100 horsepower,
we'll fix all failures for the first 12
months of operation free of charge. It also
means that on construction machines 100
horsepower and above, we'll fix all failures
for the first six months of operation. And
on Forestry equipment, we provide more
standard warranty coverage to meet the needs
in the logging environment. Again, at no
charge to you just for doing business with
John Deere.
But these days, many machine owners feel
they need more protection. Whether it's
because of a severe application or a way to
minimize the risk of doing business,
Extended Coverage warranties are an
excellent way to protect your cash flow.
John Deere also offers the exclusive
StructurAll™ warranty that goes above and
beyond the standard warranties on excavators
and skidders. The StructurAll warranty
provides three years or 10,000 hours of
"no-fear" coverage on major machine
structures as installed at the factory free
of charge, including booms, articulation
joints, and mainframes.
Extended Coverage is an additional
manufacturer backed warranty program. Here
are some reasons why it makes good business
sense:
• It's backed by the John Deere Construction
& Forestry Company - and honored by all John
Deere Construction & Forestry Dealers.
• It goes where you go. A machine covered by
an Extended Coverage warranty can be taken
to any John Deere Construction & Forestry
Dealer for service.
• There is no deductible during the Standard
Warranty and only a low $200 deductible on
non-powertrain repairs during Extended
Coverage.
• Standard or Extended Coverage warranty can
be transferred when you sell or trade your
machine.
• Financing is available through the John
Deere Finance Programs.
HERE'S WAY IT PAYS TO EXTEND YOUR COVERAGE
Extended Coverage warranties provide
additional protection that shields you from
risk and stress. They are a valuable
management tool because they give you fixed
costs for machine repairs over a given
period of time.
FEEL SECURE ABOUT USED EQUIPMENT
You can purchase an Extended Coverage
warranty on your used equipment. Here are
the details:
• For machines with less than 4,000 hours
and newer than five years old.
• Covers powertrain only.
• Three-or six-month coverage with unlimited
hours.
PRO-RATED COVERAGE - WHEN BUDGET IS AN ISSUE
We understand that sometimes you just can't
justify the cost of protecting your
equipment with an Extended Coverage
warranty. But that doesn't mean you can't
invest in some type of coverage. Extended
Coverage - Prorated is a cost-effective
alternative to our Extended Coverage
protection plan. At about half the price,
you can purchase any coverage to minimize
your risk that's based on how much you have
used the machine.
If you would like to learn more about this
program, please get in touch with your
dealer.
MAKE FLUID ANALYSIS PART OF YOUR MAINTENANCE
PROGRAM
Fluid analysis helps you reduce downtime,
lower repair costs, increase drain
intervals, and save money. It keeps you
up-to-date on the condition of all your
machine's major components and helps you
make smart decisions on machine maintenance
before and after your Standard and Extended
Coverage expires.
OWNER RESPONSIBILITY
All you have to do is perform scheduled
maintenance as outlined in the Operator's
Manual and keep accurate maintenance records
- something you do already.
Items Not Covered Under Warranty
• Ground-engaging tools such as cutting
edges and bucket teeth.
• Maintenance items such as oil and filters.
• Hydraulic pressure checks and adjustments.
• Wear items such as undercarriage
components or pin and bushing joints.
• Miscellaneous items such as bulbs and
tires.
• Hauling expenses, travel time, mileage,
overtime, or second-shift premiums.
* Batteries and undercarriage come with a
Direct Supplier Warranty that cover failure
due to defective material and workmanship.
EXPANDED RANGE OF COVERAGE FOR NEW EQUIPMENT
Extended Coverage is like putty in your
hands because you can mold it to fit your
needs. Want full coverage on the machine, or
just the engine? Need 3,000 hours of
coverage, or would 10,000 make more sense
for the work your do?
The chart below shows how flexible the
length of an Extended Coverage contract can
be.
Choose one of these four options:
1) Engine-Only.
2) Powertrain
3) Powertrain Plus Hydraulics.
4) Full Machine, or a combination of Full
Machine and one of the Powertrain options.
Coverage ends when date or hour limit
expires.
(Items in red indicate coverage added to
preceding option.)
1. Engine-Only Coverage
ENGINE:
- Rocker arm cover and gasket
- Cylinder head and gasket
- Oil pan and gasket
- Injection pump and gasket
- Injection nozzles
- Water pump and gasket
- Thermostats
- Engine block
- Ring gear and flywheel
- Timing gear cover
- Front and rear engine seals
- Turbocharger and gaskets
- Manifolds and gaskets
- Front damper
- Engine oil cooler and aftercooler
- Flywheel housing and gasket
- All parts fully enclosed within the above
components
- Electronic engine-speed-control system,
hydraulic actuator, and all parts fully
enclosed within the engine-control systems
2. Powertrain Coverage
ENGINE:
- Rocker arm cover and gasket
- Cylinder head and gasket
- Oil pan and gasket
- Injection pump and gasket
- Injection nozzles
- Water pump and gasket
- Thermostats
- Engine block
- Ring gear and flywheel
- Timing gear cover
- Front and rear engine seals
- Turbocharger and gaskets
- Manifolds and gaskets - Front damper
- Engine oil cooler and aftercooler
- Flywheel housing and gasket
- All parts fully enclosed within the above
components
- Electronic engine-speed-control system,
hydraulic actuator, and all parts fully
enclosed within the engine-control systems
TRANSMISSION/DIFFERENTIAL:
- Electronic and/or hydraulic control valves
- Pump and valve controller
- Clutch housing (except dry clutch disk)
- Torque converter
- Reverser with control valve
- Splitter drive
- Transfer drive
- Driveshaft with universal joints
- Hydrostatic transmission pump and/or motor
assemblies (including control valve)
- Propel motor, pump, brakes, and control
valves
- Swing motor and brake
- Swing gearbox and bearings
- Excavator rotary manifold
- Control valves for propel and swing
functions only (not digfunctions)
- Axle(s) and differential(s)
- Final drive and axles
- Wet steering clutches
- Wet steering brakes
- Wet service brakes
- Wet park brakes
- Front-wheel-drive sensors (not wire
harness)
- Mechanical-front-wheel-drive
differential/axle assembly with driveshaft,
universal joint, and control
- Hydraulic-front-wheel-drive axle and wheel
assembly (including drive pump and motor,
electronic control, solenoid control valve,
and divider valve)
- Park brake pinion shaft, bearing, and
bearing quill (motor graders only)
3. Powertrain Plus - Hydraulic Coverage
ENGINE:
- Rocker arm cover and gasket
- Cylinder head and gasket
- Oil pan and gasket
- Injection pump and gasket
- Injection nozzles
- Water pump and gasket
- Thermostats
- Engine block
- Ring gear and flywheel
- Timing gear cover
- Front and rear engine seals
- Turbocharger and gaskets
- Manifolds and gaskets
- Front damper
- Engine oil cooler and aftercooler
- Flywheel housing and gasket
- All parts fully enclosed within the above
components
- Electronic engine-speed-control system,
hydraulic actuator, and all parts fully
enclosed within the engine-control systems
TRANSMISSION/DIFFERENTIAL:
- Electronic and/or hydraulic control valves
- Pump and valve controller
- Clutch housing (except dry clutch disk)
- Torque converter
- Reverser with control valve
- Splitter drive
- Transfer drive
- Driveshaft with universal joints
- Hydrostatic transmission pump and/or motor
assemblies (including control valve)
- Propel motor, pump, brakes, and control
valves
- Swing motor and brake
- Swing gearbox and bearings
- Excavator rotary manifold
- Control valves for propel and swing
functions only (not digfunctions)
- Axle(s) and differential(s)
- Final drive and axles
- Wet steering clutches
- Wet steering brakes
- Wet service brakes
- Wet park brakes
- Front-wheel-drive sensors (not wire
harness)
- Mechanical-front-wheel-drive
differential/axle assembly with driveshaft,
universal joint, and control
- Hydraulic-front-wheel-drive axle and wheel
assembly (including drive pump and motor,
electronic control, solenoid control valve,
and divider valve)
- Park brake pinion shaft, bearing, and
bearing quill (motor graders only)
HYDRAULIC COMPONENTS:
- Hydraulic pumps, motors, and related
control valves
- Hydraulic cylinders
- Hydraulic hoses, lines, and fittings
- Locking pin cylinder
- Cylinder packing kits
- Control and load-holding valves
- Hydraulic reservoir
- Hydraulic oil cooler
4. Full - Machine Coverage
ENGINE:
- Rocker arm cover and gasket
- Cylinder head and gasket
- Oil pan and gasket
- Injection pump and gasket
- Injection nozzles
- Water pump and gasket
- Thermostats
- Engine block
- Ring gear and flywheel
- Timing gear cover
- Front and rear engine seals
- Turbocharger and gaskets
- Manifolds and gaskets
- Front damper
- Engine oil cooler and aftercooler
- Flywheel housing and gasket
- All parts fully enclosed within the above
components
- Electronic engine-speed-control system,
hydraulic actuator, and all parts fully
enclosed within the engine-control systems
- Oil filler tube
- Fuel lines
- Fuel transfer pump and gasket
- Pressure/temperature sensors and sending
units
- Engine mounts and supports
- Pulleys
- Engine-speed controls and linkages
- Radiator and hoses
- Engine oil lines
- Water piping
- Fuel tank and associated parts, and fan
and fan drives
TRANSMISSION/DIFFERENTIAL:
- Electronic and/or hydraulic control valves
- Pump and valve controller
- Clutch housing (except dry clutch disk)
- Torque converter
- Reverser with control valve
- Splitter drive
- Transfer drive
- Driveshaft with universal joints
- Hydrostatic transmission pump and/or motor
assemblies (including control valve)
- Propel motor, pump, brakes, and control
valves
- Swing motor and brake
- Swing gearbox and bearings
- Excavator rotary manifold
- Control valves for propel and swing
functions only (not digfunctions)
- Axle(s) and differential(s)
- Final drive and axles
- Wet steering clutches
- Wet steering brakes
- Wet service brakes
- Wet park brakes
- Front-wheel-drive sensors (not wire
harness)
- Mechanical-front-wheel-drive
differential/axle assembly with driveshaft,
universal joint, and control
- Hydraulic-front-wheel-drive axle and wheel
assembly (including drive pump and motor,
electronic control, solenoid control valve,
and divider valve)
- Park brake pinion shaft, bearing, and
bearing quill (motor graders only)
- Shift-control linkage
- Levers and pedals
- Control rods
- Sending units, and sensors
- External oil lines
- Filler tubes
- Filter screens
- Oil cooler
- Accumulator and related relief valves
- Disconnect levers and handles
- Differential lock valve and associated
parts
HYDRAULIC COMPONENTS:
- Hydraulic pumps, motors, and related
control valves
- Hydraulic cylinders
- Hydraulic hoses, lines, and fittings
- Locking pin cylinder
- Cylinder packing kits
- Control and load-holding valves
- Hydraulic reservoir
- Hydraulic oil cooler
STEERING:
- Steering pump
- Steering valves and cylinders
- Axles, spindles, and supports
- Tie rods and tie-rod ends
- Steering linkage
- Secondary steering systems components
- Crossover relief valve
- Priority valve
ELECTRICAL:
- Starter
- Starter drive, starter solenoid
- Alternator, and voltage regulator
- Wiring harnesses
- Instruments, gauges, indicators, sensors,
switches, and wiper motors
FACTORY AIR CONDITIONING:
- Compressor
- Clutch and pulley
- Condenser
- Dryer
- Evaporator
- Accumulator
- Expansion valve
- Temperature-control programmer
- Hoses and lines
- Seals and gaskets
- Heater hose
BRAKES:
- Brake pump
- Brake valve
- Brake accumulator
- Unloading valve
- Pressure-reducing valve
OTHER
- Mainframe
- Track frames
- Engine frame
- Loader boom
- Backhoe boom
- Dipperstick and linkages
- Bucket linkages
- Scarifier and ripper linkages
- Scraper bowl, draft frame and sliding
floor, elevator drive, and gearbox
- Skidder arch, skidder boom, and grapple
- Forklift mast and frame
- Motor-grader circle and circle-drive
gearbox
- Winch
FACTORY-BACKED SECURITY
There's enough day-to-day stress in the
construction and forestry business without
worrying about unpredictable machine-repair
expenses. That's why you owe it to yourself
- and your bottom line - to find out about
Extended Coverage warranty.
Extended Coverage warranty is a factory
backed extended warranty that's flexible
enough to meet the needs of any business or
government agency. Call your John Deere
dealer for all the facts today.
This brochure does not include all the
information you need to know about the
Extended Coverage warranties. For complete
details, read a copy of the Extended
Coverage warranty contract.
|
|
Home